applied load
英 [əˈplaɪd ləʊd]
美 [əˈplaɪd loʊd]
外加负载
双语例句
- This is the temperature at which a simply supported beam specimen of the material, with a centrally applied load, reaches a predefined deflection.
这是中心承载的该材料简支梁达到预定偏差的温度。 - Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.
弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。 - Chip behaviors were analyzed using scanning electron microscope ( SEM), to study the effects of applied load, scan cycles and scanning direction on nanomachining of Al and Cu samples.
切屑形态通过扫描电子显微镜（SEM）进行观察，分析了不同垂直载荷、循环次数和针尖加工方向下铝铜被加工表面的切屑形成过程。 - INFLUENCE OF STRENGTH PARAMETERS ON OVERALL DEFORMATIONS OF ROCK SPECIMENS WITH INITIALLY RANDOM MATERIAL IMPERFECTIONS Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.
强度参数对初始随机缺陷岩样全部变形的影响弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。 - Elastic recovery means that when the applied load is released, the piece returns to its original shape. test method to prove the resistance to initial ring deflection
弹性回复是指当样品所受应力撤销后，其完全回复到初始形状的现象。检验初始环状变形可能性的方法 - Because the hardness number obtained depends on the applied load, Knoop test restless should always cite the load used.
因为硬度值的获得和载荷十分密切，所以不太精确的努氏试验总是采用用过的载荷值。 - The more strong the material absorbed radiation is, the bigger the thickness the materials are and the more severe the reduction of the contrast ratio of images are. The results show that, with rise of the applied load and sliding speed, the friction coefficient decreases.
材料对射线的吸收越强、材料越厚，则图像对比度的降低越明显。温度对准晶材料表面的摩擦系数影响明显比其他因素大，温度的增加明显提高地表面摩擦系数。 - Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.
塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。 - At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.
在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。 - In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.
在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。 - Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.
弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。 - Secondly it is necessary to define the applied load.
其次，需要确定所作用的载荷。 - The simulation results show multicast routing algorithms have shorter average latency and higher throughput and balanced applied load compared with unicast routing algorithms.
通过模拟实验表明，多播较单播通信具有更小的平均传输延时和更高的网络吞吐量，且负载分配均匀； - Thermal Transient Behavior of Thrust Bearing under Step Applied Load
阶跃载荷扰动条件下推力轴承热瞬态过程研究 - With increasing the applied load and sliding velocity, the friction coefficients decrease.
随着载荷和摩擦速度的增加，摩擦系数减小。 - Dynamic plastic response of beams subjected to bending and torsion under suddenly applied load
弯扭联合作用下梁对突加载荷的塑性动力响应 - A frost heave model based on moisture temperature and applied load interaction in frozen soil
基于冻土水分温度和外荷载相互作用的冻胀模式 - Moreover, the applied load and sliding cycles directly determine the wear property of the Si ( 100).
此外，外加载荷和扫描循环次数直接决定Si（100）表面的耐磨性能。 - Compared to the cross-section, the surface of the coatings had better ability to resist applied load and better elastic recovery after unloading.
涂层表面比断面具有更为优良的抵抗外加负载和卸载后良好的弹性恢复的能力。 - This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.
该公式为应力断料时的预荷力计算提供了理论依据。 - The test result shows that the dynamic load factor of the suddenly applied load such as the inertial load and the impact load is larger than 2, and so cannot be ignored.
测试结果表明：惯性载荷和冲击力等突加载荷的动荷系数都大于2，因此是不能忽略的。 - Analysis of Applied load and Displacement of More Than One Span Steel Structure of Portal Frames With and Without Hinges
多跨无铰与有铰钢结构门式框架承载力及位移的对比分析 - By increasing gradually the applied load, the damage propagation and the ultimate strength are obtained.
层合板的破坏扩展及极限强度通过逐渐增加载荷迭代求得。 - Application of sudden applied load method in blast simulation
突加载荷法在模拟爆破中的应用 - The fracture mechanism of PVC under applied load and the cause of 'stress relaxation under high speed tension load are discussed.
探讨了PVC在外加载荷作用下的断裂过程和高速拉伸的应力松驰现象的产生机制。 - Meanwhile, based on the double-FBG structure, a strain sensor box model of aerospace plane is built so as to analyze the relationship between applied load and strain distribution.
同时，在双光纤布拉格光栅传感器结构的基础上，提出了一种基于光纤光栅的空天飞机箱体应力传感器模型，分析了外加载荷和应变分布之间关系。 - The results indicate that the simultaneous measurement of temperature and strain can be realized in the double-FBG structure, and the strain has a linear relationship with the applied load.
仿真结果表明：双光纤布拉格光栅传感器结构可以实现温度和应变的同时测量，应力和外加载荷力成线性关系。 - Then the dynamic responses of the plate subjected to suddenly applied load and harmonious load are analyzed.
对弹性半空间上方板在突加荷载及谐和荷载作用下的动力响应进行了时程分析。 - Finite element analysis and the key components of the applied load and constraint, analysis the stress, deformation, and security aspects, verified its performance to meet the design requirements and confirmed the feasibility, thus ensured the reliability of the design.
并且对传动轴通过施加载荷与约束进行有限元分析，对其所受应力和安全性等方面进行了分析，验证了其性能满足设计的要求，证实了方案的可行性和合理性。